Features

• Battery Powered
• 128 Selectable codes allow more than 1 chime system in the same house
• LED  halo lighted push button
• Fits any mounting plate with a 5/8" diameter opening
• Works with stucco or aluminum siding

Hole Requirements
Please note that the optional wireless button/transmitter requires a 3/4" hole drilled 3 1/2" deep behind your chosen doorbell design. Be sure that you have enough room to drill this hole. To install, drill the 3/4 inch diameter hole 3 1/2 inches deep in the wall behind the doorbell cover you have chosen, mount the doorbell cover using the mounting hardware provided, and push the wireless button/ transmitter into the hole until it is snug against the doorbell cover face.

Chime Requirements
Please also note that this wireless button/transmitter requires a wireless doorbell chime in order to work. Doorbell Factory's wireless chimes are tuned to the same frequency as our wireless doorbell button/transmitter. We cannot guarantee that other wireless chimes will work with this button/transmitter.

Battery Replacement
Instructions Each wireless button/transmitter comes with a battery, and is guaranteed for one year. To replace, pry the wireless button/transmitter out of the doorbell cover using a small flat head screwdriver, and slide out. Open the small door on the unit, replace the battery, and push the wireless button/transmitter back into the doorbell cover until snug.